Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites
AuthorsShah, Syed Zulfiqar Hussain
Megat-Yusoff, Puteri Sri Melor
Choudhry, Rizwan Saeed
MetadataShow full item record
AbstractThis paper presents an extensive comparison of the mechanical properties and failure mechanisms of a recently developed thermoplastic (Elium ®) 3D fabric-reinforced composite (3D-FRC) with the conventional thermoset (epoxy) 3D-FRC. Experiments involved tensile tests, compression tests, V-notch shear tests, and short beam shear tests for specimens produced through the vacuum-assisted resin infusion process in each case. These tests were used for the determination of in-plane elastic constants, failure strengths and for investigating the failure mechanisms. A micro-mechanical model validated against these experiments was used to predict the remaining orthotropic elastic constants. This work enhances our understanding of the mechanics of infusible thermoplastic 3D-FRC as a new class of emerging materials and provides useful data which substantiates that this unconventional thermoplastic resin is also easier to recycle, uses similar manufacturing processes and can be a suitable replacement for conventional thermoset resins.
CitationShah, S.Z.H., Megat-Yusoff, P.S.M., Karuppanan, S., Choudhry, R.S., Ahmad, F. and Sajid, Z. (2021). 'Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites'. Applied Composite Materials, pp. 1-31.
PublisherSpringer Science and Business Media LLC
JournalApplied Composite Materials
Showing items related by title, author, creator and subject.
Facile template-free synthesis of hierarchically porous NiO hollow architectures with high-efficiency adsorptive removal of Congo redHu, Hanmei; Deng, Chonghai; Sun, Mei; Zhang, Kehua; Wang, Man; Xu, Jiayi; Le, Huirong; Hefei University; University of Derby (Springer, 2019-06-05)Hierarchically porous NiO hollow architectures (HPHAs) were synthesized via a one-pot facile chemical bath deposition method and followed by a calcination process. The crystal structure, component and morphology of the products were characterized by various techniques. The results revealed that hierarchical architectures with hollow interior are composed of mesoporous NiO nanoflakes with thickness of about 8 nm. Interestingly, the as-synthesized NiO HPHAs have the unusual three-ordered porous features including a microscale hollow interior and two mesoscale pores which are attributed to the holes on the surface of nanoflakes with an average diameter of about 3.9 nm and the cavities on the wall of microsphere in the range of 20–40 nm in diameter formed by interconnecting nanoflakes. These comprehensive hierarchically porous structures are beneficial for the adsorption performance towards Congo red in water. The absorptive capacity over NiO HPHAs achieved about 1.8 and 4.0 times as high as that of the precursor β-Ni(OH)2 hollow microspheres (HSs) and the commercial activity carbon (AC) under the same conditions. The studies of adsorption kinetics illustrated that the adsorption behavior perfectly obeyed the pseudo-second-order model and the adsorption isotherm fits the Langmuir adsorption assumption well. The maximum adsorption capacities were calculated to be 490.2 mg g−1 according to the Langmuir equation, which is excellent result compared to NiO absorbents. The high-efficiency adsorption capacities for NiO HPHAs are attributed to the large specific surface area, the synergistic effect of micro-mesoporous structure and the electrostatic interaction of NiO with CR molecules. Additionally, NiO HPHAs can be easily renewed and has good chemical stability, indicating a great promising absorbent in the application for the removal of diazo organics in wastewater.
A novel technique for dynamic shear testing of bulk metals with application to 304 austenitic stainless steelJia, B.; Rusinek, A.; Pesci, R.; Bernier, R.; Bahi, S.; Wood, P.; ENSAM-Arts et Métiers ParisTech, Paris; Lorraine University, France; Institute of Fundamental Technological Research, Warsaw, Poland; Carlos III University, Madrid; et al. (Elsevier BV, 2020-09-03)This paper describes a new single-shear specimen (SSS) and method to characterize the dynamic shear behavior of bulk metals using a traditional Split Hopkinson Pressure Bar (SHPB). By this method, the shear behavior of materials can be tested conveniently over a wide range of strain rates within 105 s−1. This technique was applied to a 304 austenitic stainless steel (ASS) under shear strain rates from 0.001 s−1 to 38700 s−1 at room temperature. Based on finite element (FE) simulations, it was found that the deformation of the specimen shear zone was dominated by shear stress/strain components. Stress state parameters represented by stress triaxiality and Lode angle parameter were found very close to zero, indicating a deformation mode of simple shear. Besides, an obvious gap existed between the local deformation behavior in the specimen shear zone and the macroscopic stress-strain relations measured by the strain gauges on the SHPB bars. A correction coefficient method was adopted to extract the real shear behavior from the experimentally obtained force-displacement data. Through comparisons between the tested and simulated stress-strain curves, a good agreement was obtained.
On wind turbine power fluctuations induced by large-scale motionsAhmadi, Mohammad; Yang, Zhiyin; University of Derby (Elsevier, 2021-04-21)Our current understanding on the dynamic interaction between large-scale motions in the approaching turbulent flow and wind turbine power is very limited. To address this, numerical studies of a small-scale three-bladed horizontal axis wind turbine with cylinders placed in front of it to produce energetic coherent structures of varying scale relative to the turbine size have been carried out to examine the temporary variations of the turbine power. The predicted spectra reveal a strong interaction between large-scale turbulent motions generated by cylinders and the instantaneous turbine power. More specifically, it shows how the large dominant turbulent scales of incoming flow affect the spectral characteristics of turbine power, i.e, determining the level and trend of the turbine power spectrum. Comparisons reveal that there are two critical frequencies recognisable in the turbine power spectrum: the first one, close to the turbine rotational frequency, above which the coupling of upstream flow and turbine power disappears; the second one, identified for the first time and related to the dominant large-scale motions which dictate the level and trend of the turbine power spectrum. This study also shows that the strong scale-to-scale interaction between the upstream flow and turbine power reported previously does not appear at high Reynolds numbers.