Show simple item record

dc.contributor.authorGuilherme da Silva, H
dc.contributor.authorEspíndola Ferreira, J.C
dc.contributor.authorVikas, K
dc.contributor.authorGarza-Reyes, J.A.
dc.identifier.citationGuilherme da Silva, H., Espíndola Ferreira, J.C., Vikas, K., Garza-Reyes, J.A. (2020). 'Benchmarking of cleaner production in sand mould casting companies'. Management of Environmental Quality, pp. 1-29.en_US
dc.description.abstractThe purpose of this research was to develop new sustainability indicators consistent with the sand mould casting industry, through Benchmarking of Cleaner Production (CP), in order to identify the levels of practice and performance of companies of the casting sector. In addition, a lean manufacturing checklist was specified in order to verify the presence of lean manufacturing techniques employed to eliminate waste towards CP. No previous work was found in the literature that attempts to assess practices and performance of companies performing sand mould casting (a significantly polluting manufacturing process) in the context of cleaner production and lean manufacturing. For the application of this benchmarking, nine companies from the sand mould casting sector were studied, where the profile of each company was analysed through 8 variables and 47 indicators. Data were obtained through face-to-face visits and questionnaire application in the companies, and the data were analysed both quantitatively and qualitatively. The results obtained were the diagnosis of companies' practices and performance resulting from their position in the benchmarking charts, as well as the identification of the areas in which companies should implement improvements aiming at achieving CP. This research was developed specifically for sand mould casting companies, and each process has its own characteristics. 14 companies that perform sand mould casting were invited to participate in this survey, but unfortunately five companies declined to participate. It is important to diagnose casting companies regarding cleaner production practices, performance and deployment potential. Thus, important negative issues in the company can be identified and, with this information, they can develop actions focused on cases that need more attention. In addition, this work contributes to evaluate the relationship and efficiency of improvement actions developed by companies in the context of both lean manufacturing and cleaner production, aiming to reduce or eliminate the environmental impact. The improvement of practices and performance of a company regarding cleaner production is considered to be beneficial to supply chain management in the context of sustainability, as the other participating companies are likely to seek ways to reduce environmental impact, and the diagnostics provided by this work may also be used by those companies.en_US
dc.rightsCC0 1.0 Universal*
dc.subjectCleaner Production, Casting, Lean Manufacturing, Benchmarking, Sustainable Manufacturing, Supply Chain Management.en_US
dc.titleBenchmarking of cleaner production in sand mould casting companiesen_US
dc.contributor.departmentUniversidade Federal de Santa Catarina, Florianópolis, Brazilen_US
dc.contributor.departmentUniversity of the West of Englanden_US
dc.contributor.departmentUniversity of Derbyen_US
dc.identifier.journalManagement of Environmental Qualityen_US

Files in this item

1. Manuscript-revised.pdf
Accepted Manuscript

This item appears in the following Collection(s)

Show simple item record

CC0 1.0 Universal
Except where otherwise noted, this item's license is described as CC0 1.0 Universal