Show simple item record

dc.contributor.authorSummerskill, Steve
dc.contributor.authorMarshall, Russell
dc.contributor.authorCase, Keith
dc.contributor.authorGyi, Diane E.
dc.contributor.authorSims, Ruth
dc.contributor.authorDavis, Peter
dc.contributor.authorDay, Philip N.
dc.contributor.authorRohan, C.
dc.contributor.authorBirnie, S.
dc.date.accessioned2017-06-29T11:30:12Z
dc.date.available2017-06-29T11:30:12Z
dc.date.issued2010
dc.identifier.citationSUMMERSKILL, S. ... et al., 2010. Validation of the HADRIAN system using an ATM evaluation case study. International Journal of Human Factors Modelling and Simulation, 1 (4), pp. 420-432en
dc.identifier.issn0954-4054
dc.identifier.doi10.1504/IJHFMS.2010.040275
dc.identifier.urihttp://hdl.handle.net/10545/621711
dc.description.abstractThe HADRIAN human modelling system is under development as part of the EPSRC funded AUNT-SUE project. The HADRIAN system aims to foster a 'design for all' ethos by allowing ergonomists and designers to see the effects of different kinds of disability on the physical capabilities of elderly and people with disabilities. This system is based upon the long established SAMMIE system, and uses data collected from 102 people, 79 of whom are registered as disabled, or have age related mobility issues. The HADRIAN system allows three dimensional CAD data of new products to be imported, with a subsequent automated analysis using all of the 102 sample members. The following paper describes the process and results gathered from a validation study using an ATM design as a case study. The results indicated that fine tuning of the behavioural data built into HADRIAN would improve the accuracy of an automated product analysis.
dc.relation.urlhttps://dspace.lboro.ac.uk/2134/12250en
dc.titleValidation of the HADRIAN system using an ATM evaluation case studyen
dc.typeArticleen
dc.identifier.eissn1742-5557
dc.contributor.departmentLoughborough Universityen
html.description.abstractThe HADRIAN human modelling system is under development as part of the EPSRC funded AUNT-SUE project. The HADRIAN system aims to foster a 'design for all' ethos by allowing ergonomists and designers to see the effects of different kinds of disability on the physical capabilities of elderly and people with disabilities. This system is based upon the long established SAMMIE system, and uses data collected from 102 people, 79 of whom are registered as disabled, or have age related mobility issues. The HADRIAN system allows three dimensional CAD data of new products to be imported, with a subsequent automated analysis using all of the 102 sample members. The following paper describes the process and results gathered from a validation study using an ATM design as a case study. The results indicated that fine tuning of the behavioural data built into HADRIAN would improve the accuracy of an automated product analysis.


This item appears in the following Collection(s)

Show simple item record