Tailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implants

Hdl Handle:
http://hdl.handle.net/10545/621109
Title:
Tailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implants
Authors:
Danookdharree, Urvashi; Le, Huirong ( 0000-0002-6368-7466 ) ; Handy, Richard; Tredwin, Christopher
Abstract:
Self-assembled nano-structure on the surface of bone/dental implants has attracted significant interest in the last few decades. In this context, anodic TiO2 nanotubes have been shown to have a beneficial effect on osteoblast differentiation and bone formation around implant [1-2]. However, there is uncertainty about the interfacial adhesion to substrate as a surface coating for medical implants [3]. In this study, the effects of anodising conditions on the morphology, composition and interfacial adhesion of the nanotubes grown on titanium alloy were investigated with various electrolytes, pH values and voltage seep rate.
Affiliation:
University of Plymouth
Citation:
Danookdharree, U. et al (2014) 'Tailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implants', [Poster] The 26th Annual Conference of the European Society for Biomaterials (ESB), Liverpool, UK, 31st August – 3rd September
Journal:
The 26th Annual Conference of the European Society for Biomaterials (ESB).
Issue Date:
Sep-2014
URI:
http://hdl.handle.net/10545/621109
Additional Links:
http://www.esb2014.org/full_programme.pdf; http://www.esb2014.org/
Type:
Presentation
Language:
en
Appears in Collections:
Department of Mechanical Engineering & the Built Environment

Full metadata record

DC FieldValue Language
dc.contributor.authorDanookdharree, Urvashien
dc.contributor.authorLe, Huirongen
dc.contributor.authorHandy, Richarden
dc.contributor.authorTredwin, Christopheren
dc.date.accessioned2016-12-02T14:10:14Z-
dc.date.available2016-12-02T14:10:14Z-
dc.date.issued2014-09-
dc.identifier.citationDanookdharree, U. et al (2014) 'Tailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implants', [Poster] The 26th Annual Conference of the European Society for Biomaterials (ESB), Liverpool, UK, 31st August – 3rd Septemberen
dc.identifier.urihttp://hdl.handle.net/10545/621109-
dc.description.abstractSelf-assembled nano-structure on the surface of bone/dental implants has attracted significant interest in the last few decades. In this context, anodic TiO2 nanotubes have been shown to have a beneficial effect on osteoblast differentiation and bone formation around implant [1-2]. However, there is uncertainty about the interfacial adhesion to substrate as a surface coating for medical implants [3]. In this study, the effects of anodising conditions on the morphology, composition and interfacial adhesion of the nanotubes grown on titanium alloy were investigated with various electrolytes, pH values and voltage seep rate.en
dc.language.isoenen
dc.relation.urlhttp://www.esb2014.org/full_programme.pdfen
dc.relation.urlhttp://www.esb2014.org/en
dc.subjectDental implantsen
dc.subjectTitanium alloyen
dc.subjectSurface coatingen
dc.titleTailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implantsen
dc.typePresentationen
dc.contributor.departmentUniversity of Plymouthen
dc.identifier.journalThe 26th Annual Conference of the European Society for Biomaterials (ESB).en
All Items in UDORA are protected by copyright, with all rights reserved, unless otherwise indicated.